Reading measured value block, memory seat, rear, Audi A8 2003>

The following measured values are displayed:

Output signals:

Measured value block 001:  

Readout 1                             (without readout)

 

Readout 2 from left to right:

Door contact left:                  (unpressed = 0; pressed = 1)

Door contact right:                (unpressed = 0; pressed = 1)

Term.15:                               (off = 0; on =1)

Easy Entry left                       (inactive = 0; active = 1)

Easy Entry right                     (inactive = 0; active = 1)

 

 

Measured value block 002:

Status of seat longitudinal adjustment button, left:                      (forward, back; pressed; implaus:)

Current readout, seat longitudinal adjustment, left:                      (number between 0.....65535)

Status of seat longitudinal adjustment button, right:                    (forward, back; pressed; implaus:)

Current readout, seat longitudinal adjustment, right:                    (number between 0.....65535)

 

 

Measured value block 012:

Status of seat rake adjustment button, left:          (raise; lower; unpressed; implaus:)

Current readout, seat rake adjustment, left:          (number between 0.....65535)

Status of upper backrest adjustment button, left: (forward, back; pressed; implaus:)

Current readout, upper backrest adjustment, left:  (number between 0.....65535)

 

 

Measured value block 013:

Status of lumbar support curvature adjustment button, left:         (raise; lower; unpressed; implaus:)

Current readout, lumbar support curvature adjustment, left:         (number between 0.....65535)

Status of lumbar support height adjustment button, left:             (raise; lower; unpressed; implaus:)

Current readout, lumbar support height adjustment, left:              (number between 0.....65535)

 

 

Measured value block 022:

Status of upper backrest adjustment button, right:          (forward, back; pressed; implaus:)

Current readout, upper backrest adjustment, right:          (number between 0.....65535)

Status of seat rake adjustment button, right:        (raise; lower; unpressed; implaus:)

Current readout, seat rake adjustment, right:         (number between 0.....65535)

 

 

Measured value block 023:

Status of lumbar support curvature adjustment button, right:       (raise; lower; unpressed; implaus:)

Current readout, lumbar support curvature adjustment, right:        (number between 0.....65535)

Status of lumbar support height adjustment button, right:                        (raise; lower; unpressed; implaus:)

Current readout, lumbar support height adjustment, right:            (number between 0.....65535)

 

 

Measured value block 035:

Status of massage button, left:                           (not pressed = 0; pressed = 1)

Active specified massage time, left:                    (number between 0.....65535)

Active actual massage time, left:                         (number between 0.....65535; 0 = inactive)

Actual lumbar support curvature position, left:      (number between 0.....65535)

 

 

Measured value block 036:

Status of massage button, right:                         (not pressed = 0; pressed = 1)

Active specified massage time, right:                  (number between 0.....65535)

Active actual massage time, right:                       (number between 0.....65535; 0 = inactive)

Actual lumbar support curvature position, right:              (number between 0.....65535)

 

 

Measured value block 041:  

Readout 1(Energy Manager shut-off stages):

Full function:                                                                 (= 0)

Manual adjustment <2 min.; Memory max. 4x:                 (= 1)

Manual adjustment <2 min.; Memory max. 4x:                 (= 2)

Manual adjustment <2 min.; No memory:                                    (= 3)

Transport mode; Manual adjustment <2 min.; No memory:           (= 4)

Compl. shut-off / No control unit wakeup; No manual adjustment; No memory:                                                                (= 6)

 

 

Readout 4

Service fault           (inactive = 0; active = 1)

 

 

Measured value block 042:  

Readout 1 from left to right:

Seat longitudinal adjustment, left:                        (inactive = 0; active = 1)

Seat backrest rake adjustment, left:      (inactive = 0; active = 1) 

Seat upper backrest adjustment, left:                   (inactive = 0; active = 1)

Seat rake adjustment, left:                    (inactive = 0; active = 1)

Lumbar support height adjustment, left:               (inactive = 0; active = 1)

Lumbar support curvature adjustment, left:           (inactive = 0; active = 1)

 

 

Readout 2 from left to right:

Seat longitudinal adjustment, right:                      (inactive = 0; active = 1)

Seat rake adjustment, right:   (inactive = 0; active = 1)    

Upper backrest adjustment, right:                        (inactive = 0; active = 1)

Seat rake adjustment, right:   (inactive = 0; active = 1)

Lumbar height adjustment, right:           (inactive = 0; active = 1)

Lumbar support curvature adjustment, right:         (inactive = 0; active = 1)

 

 

Measured value block 049:

Readout 1:

Reset counter:                       (number between 0.....65535)

 

 

Readout 2 from left to right (source of last reset):

Hardware watchdog:              (inactive = 0; active = 1)

Software interrupt:  (inactive = 0; active = 1)

PowerOn:                              (inactive = 0; active = 1)

CAN:                      (inactive = 0; active = 1)

Manual adjuster:     (inactive = 0; active = 1)

 

 

Measured value block 050:

Readout 1 from left to right:

Seat longitudinal adjustment motor standardization, left: (not standardised = 0; standardised =1)

Seat rake adjustment motor standardization, left: (not standardised = 0; standardised =1)

Upper backrest adjustment motor standardization, left:   (not standardised = 0; standardised =1)

Lumbar support curvature adjustment motor standardization, left:            (not standardised = 0; standardised =1)

Lumbar support height adjustment motor standardization, left:                (not standardised = 0; standardised =1)

 

 

 

Readout 2 from left to right:

Seat longitudinal adjustment motor standardization, right:           (not standardised = 0; standardised =1)

Seat rake adjustment motor standardisation, right:          (not standardised = 0; standardised =1)

Upper backrest adjustment motor standardisation, right: (not standardised = 0; standardised =1)

Lumbar support curvature adjustment motor standardisation, right:          (not standardised = 0; standardised =1)

Lumbar support height adjustment motor standardisation, right:              (not standardised = 0; standardised =1)

 

 

Measured value block 051:

Maximum software travel, seat longitudinal adjustment, left:                                (number between 0.....65535)

Stored value, software block front, seat longitudinal adjustment, left:      (number between 0.....65535)

Stored value, software block rear, seat longitudinal adjustment, left:        (number between 0.....65535)

Stored value, load change counter, seat longitudinal adjustment, left:      (number between 0....0.500)

 

 

Measured value block 052:

Maximum software travel, seat rake adjustment, left:                   (number between 0.....65535)

Stored value, lower software block, seat rake adjustment, left:    (number between 0.....65535)

Stored value, upper software block, seat rake adjustment, left:   (number between 0.....65535)

Stored value, load change counter, seat rake adjustment, left:     (number between 0....0.500)

 

 

Measured value block 053:

Maximum software travel, upper backrest adjustment, left:                      (number between 0.....65535)

Stored value, software block front, upper backrest adjustment, left:        (number between 0.....65535)

Stored value, software block rear, upper backrest adjustment, left:          (number between 0.....65535)

Stored value, load change counter, upper backrest adjustment, left:        (number between 0....0.500)

 

 

Measured value block 054:

Maximum software travel, lumbar support curvature, left:                                    (number between 0.....65535)

Stored value, software block front, lumbar support curvature, left:           (number between 0.....65535)

Stored value, software block rear, lumbar support curvature, left:            (number between 0.....65535)

Stored value, load change counter, lumbar support curvature, left:          (number between 0....0.500)

 

 

Measured value block 055:

Maximum software travel, lumbar support height, left:                             (number between 0.....65535)

Stored value, software block front, lumbar support height, left:   (number between 0.....65535)

Stored value, software block rear, lumbar support height, left:     (number between 0.....65535)

Stored value, load change counter, lumbar support height, left:   (number between 0....0.500)

 

 

Measured value block 056:

Maximum software travel, seat longitudinal adjustment, right:                  (number between 0.....65535)

Stored value, software block front, seat longitudinal adjustment, right:    (number between 0.....65535)

Stored value, software block rear, seat longitudinal adjustment, right:      (number between 0.....65535)

Stored value, load change counter, seat longitudinal adjustment, right:    (number between 0....0.500)

 

 

Measured value block 057:

Maximum software travel, seat rake adjustment, right:                 (number between 0.....65535)

Stored value, software block lower, seat rake adjustment, right (number between 0.....65535)

Stored value, software block upper, seat rake adjustment, right (number between 0.....65535)

Stored value, load change counter, seat rake adjustment, right:   (number between 0....0.500)

 

 

Measured value block 058:

Maximum software travel, upper backrest adjustment, right:                    (number between 0.....65535)

Stored value, software block front, upper backrest adjustment, right:      (number between 0.....65535)

Stored value, software block, upper backrest adjustment, right (number between 0.....65535)

Stored value, load change counter, upper backrest adjustment, right:      (number between 0....0.500)

 

 

Measured value block 059:

Maximum software travel, lumbar support curvature, right:                                   (number between 0.....65535)

Stored value, software block front, lumbar support curvature, right:         (number between 0.....65535)

Stored value, software block rear, lumbar support curvature, right:          (number between 0.....65535)

Stored value, load change counter, lumbar support curvature, right:         (number between 0....0.500)

 

 

Measured value block 060:

Maximum software travel, lumbar support height, right:               (number between 0.....65535)

Stored value, software block front, lumbar support height, right: (number between 0.....65535)

Stored value, software block, rear, lumbar height adjustment, right (number between 0.....65535)

Stored value, load change counter, lumbar support height, right: (number between 0....0.500)

 

 

Measured value block 130:  

Mode:                                   (one-wire; two-wire)

Gateway:                                             (Gateway: 1 = active; 0 = inactive)

Battery Energy Manager (BEM):            (BEM 1 = active; 0 = inactive)

Driver seat memory:                                            (Memory: 1 = active; 0 = inactive)

 

 

 

Measured value block 131:

Electric ignition lock (DAS):   (DAS 1 = active; 0 = inactive)

Rear right door control unit:                  (Door rr: 1 = active; 0 = inactive)

Rear left door control unit:                    (Door rl 1 = active; 0 = inactive)